alloy process

英 [ˈælɔɪ ˈprəʊses] 美 [ˈælɔɪ ˈprɑːses]

【电】合金过程

电力

双语例句

  1. By analyzing the characteristics of aluminum alloy forging process, a reasonable forging process of aluminum alloy was determined and a drawing of reasonable forging mold was designed.
    通过分析铝合金模锻工艺的特点，确定合理的铝合金连杆模锻工艺并绘制了模具图。
  2. A Research of the Impacts of Static Magnetic Field and Direct Current ( DC) Electric Field on the Al-Si Alloy Solidification Process and Organizational Performance
    稳恒磁场及直流电场对铝硅合金凝固过程及组织性能的影响研究
  3. In the traditional titanium alloy process turning efficiency is lower, this because both cutting speed and tool life are lower and process quality controlled is very difficult.
    传统的钛合金车削加工因其切削速度低，刀具耐用度低，加工质量难于控制，导致加工效率低。
  4. This article mainly talks about the impacts of static magnetic field, direct current electric field and electromagnetic field on the Al-Si alloy solidification process and organizational performance.
    本文主要研究稳恒磁场、直流电场以及电磁场对铝硅合金凝固过程及组织性能的影响。
  5. The research progresses and applications of Cu-Sn alloy plating process are presented, and the bath formulations and operational conditions of Cu-Sn alloy plating process are also introduced.
    介绍了电镀铜锡合金工艺的研究进展和应用、电镀铜锡合金被液配方和工艺条件。
  6. A new Zn-Fe alloy plating process alternative to former cyanide zinc plating was adopted for barrel plating auto lines of motor components and parts in the factory of Chang'an group Co.
    某厂汽车零部件滚镀自动线采用锌铁合金新工艺取代了原氰化滚镀锌工艺。
  7. Casting: The process of forcing molten metal into a mould to create a character or slug of type. Study on Mold Filling in Magnesium Alloy EPC Process with Vacuum
    浇铸：把溶解的金属挤压出，充满到字模内，铸成字粒或字条的过程。镁合金负压消失模铸造充型过程的研究
  8. Texture Analysis of Cu-Cr-Zr Alloy in Process of Deformation
    Cu-Cr-Zr系合金变形过程中的织构分析
  9. Theoretical Analysis on Influence of Electron Pulse Modification on Al-Cu-Mg Alloy Aging Process with Valence Electron Structure
    电脉冲孕育处理对Al-Cu-Mg合金时效影响的价电子理论分析
  10. Effects of vacuum and pouring temperature on thermal transfer between metal-mold interfaces for magnesium alloy LFC process are investigated by thermocouple and computer data collection system.
    采用热电偶和计算机数据采集系统研究了真空度和浇注温度对一镁合金消失模铸造金属-铸型间的传热的影响。
  11. The Influence of Ce on the Ni-Fe Alloy Deposition Process
    稀土Ce对Ni-Fe合金性能的影响
  12. Study on Perforation Technique in Copper and Copper Alloy Extrusion Process
    铜及铜合金挤压过程中穿孔技术的研究
  13. Relation between aluminium alloy casting process and ingot quality
    铝合金铸造工艺与铸锭质量的关系
  14. The study will be a base for process parameter optimization, tool's optimization selection and design of aluminum alloy milling process, and also a new way to control machining distortion of monolithic components.
    铣削加工切削力的数值模拟研究为航空铝合金切削加工的工艺参数优化、刀具的合理选择及其优化设计奠定了基础，同时也为进一步有效控制整体结构件的加工变形提供了新的研究手段。
  15. An alkaline zincate Zn Fe alloy plating process is studied, and the influence of the bath composition and process conditions on the iron content in the deposit is also investigated, as a result the optimal bath composition and process conditions are obtained.
    研究了碱性锌酸盐电镀ZnFe合金工艺，考察了合金镀液组成及工艺条件对合金镀层中铁含量的影响，得到了最佳镀液组成及工艺条件。
  16. Electroless Ni-P alloy plating process on PET substrates was studied.
    研究了在PET表面化学镀Ni-P合金的工艺，结果表明：实验选定的粗化时间对镀层形貌，镀速没有明显的影响；活化时间影响镀速，时间的增加镀速加快；
  17. Traditional Ti alloy milling process can not meet the requirements of NC milling because of its low cutting speed.
    传统的钛合金铣削工艺因其切削速度低，不能满足数控铣削的工艺要求。
  18. Influence of Cerium on Solute Distribution during the Directional Aluminum Alloy Solidification Process
    铈对铝合金定向凝固过程溶质再分布的影响
  19. New Advance of Alloy Solidification Process Under High Pressure
    高压作用下合金凝固的研究进展
  20. Typical Flaw Analysis and Solving Measure in Aluminum Alloy Die-casting Process
    铝合金材料压铸加工中典型缺陷分析及解决措施
  21. Discussion on smelting Musi alloy process with Burmese ore
    使用缅矿冶炼锰硅合金的工艺探讨
  22. The effect of Ni-Co alloy electrodepositing process with rare earth compounds in the plating solution was studied.
    研究了在电镀溶液中加入稀土化合物后对电沉积Ni-Co合金的影响。
  23. The 2224 aluminum alloy modification process by equal channel angular pressing ( ECAP) combined with heat-treatment is investigated, and the microstructure and mechanical properties of the processed 2224 aluminum alloy are analyzed and compared.
    研究应用ECAP法与热处理工艺相结合的方法改性2224铝合金的过程，对改性2224铝合金的力学性能及显微组织进行比较分析。
  24. After ascertained the alloy coating process factor, the effect of pouring temperature and vacuum on surface alloying were studied.
    在确定合金膏块工艺之后，探讨了浇注温度、负压真空度对表面合金化效果的影响；
  25. The characteristics of copper alloy Mold process and its effect on the properties of ductile iron and gray iron castings are presented in this paper.
    本文介绍了铜合金金属型的特点及其对所生产的球墨铸铁件、灰铸铁件性能的影响；
  26. The paper presents the new zinc-nickel alloy process and provides the electro-zinc-nickel alloy colour passivation process based on the research and test
    简要地介绍了锌镍合金电镀新工艺，推荐了通过理论研究和实验摸索确定的电镀锌镍合金后彩色钝化工艺
  27. This paper analyzes impurity and microstructure on Ti-Al-Zr titanium alloy through metallographic test after introduced the metallurgy history, chemical composition of this alloy and process cycle of tube.
    介绍了Ti-Al-Zr钛合金的冶金历史及其管材的加工工艺流程和化学成分后，用金相法分析了该种钛合金管材中存在的夹杂物种类及金相组织。
  28. The Homogeneity of Casting Alloy Process Effected by Ultrasonic
    超声波对合金结晶过程的均匀化作用
  29. Application of pulse bag filter in waste gas processing of copper alloy process
    脉冲袋式除尘系统在铜合金加工废气治理中的应用
  30. Research on Galvanizing Bolt by Dipping Zinc Nickel Alloy Process
    螺栓热浸镀Zn-Ni合金工艺
点击展开全文

考试分类

行业分类

柯林斯词典词频分级词汇

其他分类